ARRL -- The national association for Amateur Radio ARRL -- The national association for Amateur Radio
Buckmaster -- Ad
Find on this site...
Site Index 
  
Search site:
  
Call sign search:
 
ARRL Member Login...
Username:   Password:

  
Register    Forgot userid/password? 
Quick Links...
Text-only 
ARRL Products:
Help for Beginners

(More)

Online Course: The ARRL Ham Radio License Course -- Prepare for your first Amateur Radio license!

Basic Antennas -- Now Shipping! -- An introduction to antennas--basic concepts, practical designs, and easy-to-build antennas!

US Amateur Radio Bands - ARRL Frequency Chart (11 x 17") -- Full color, size 11 x 17 inches.

Basic Radio - Understanding the Key Building Blocks -- FINALLY--an introduction to radio FOR EVERYONE!--what it does and how it does it.

Understanding Basic Electronics -- This book provides a stepping-stone to learning electronics. With the foundation it helps you create, you'll be ready to learn more advanced concepts.

January 2005 QST Feedback

In "Hands-On Radio, Experiment #21: The L-Network" [Oct 2004, p 63] the reactance-canceling inductance in the design example should be 0.11 µH, not 0.32 µH, as printed. This is the correct value for 28 MHz.--tnx KB9WMJ

"A High Quality Speaker System for the Ham Shack" [Oct 2004, p 28-34] had a couple of measurement errors. In Figure 14, the speaker cutout measurements are incorrect. The 2 inch hole for the tweeter should be 2 1/4 inches from the left side. The 3 7/8 inch hole should be 5 7/8 inches from the left side. Several readers wondered why the back was smaller than the front. The back is purposely smaller in size so that the unfinished back edges do not show against the finished sides and top.

A couple of errors crept into "A 12 V dc Boost Regulator for Battery Operation" [Nov 2004, p 37]. The schematic (Figure 2, p 38) shows a solid line drawn from the right side of R7 to ground. That is incorrect; a capacitor, C14 (220 µF, 16 V) should take its place, with the negative side connected to ground. The Web site reference schematic is correct (www.arrl.org/files/qst-binaries/boost_reg.zip). Also, the SCR in the crowbar circuit (Figure 5, p 40) is drawn backward; the anode and cathode should be reversed--the gate lead is correct.

In "A 10/17 Meter Hanging Loop Antenna" [Oct 2004, p 42], the materials table (Table 1) should show the 14 gauge wire quantity as 100 feet, not 65 feet. You'll need at least 91 feet of wire to build the antenna.

A cautionary note if you're trying to run the Microsoft software development tools referenced in "Programming for the Pocket PC" [Dec 2004, p 38]. Various operating systems, including Windows XP, require you to be logged on as an "Administrator" to run the tools successfully.--tnx K1EHW

Clarification: 2005 ARRL Handbook Editor Dana Reed, W1LC, was quoted in "ARRL in Action" [Nov 2004, p 13] as saying, "Every chapter was updated...[from the 2004 edition]." In fact, many chapters were updated, and nearly all were revised in compiling the new Handbook.



Page last modified: 03:08 PM, 13 Dec 2004 ET
Page author: qst@arrl.org
Copyright © 2004, American Radio Relay League, Inc. All Rights Reserved.